The D25M Ti limited edition tributes to the finest master craftsmanship and the gorgeous titanium material.
The unique beauty of Titanium
Titanium has the highest strength-to-weight ratio of any metal and superb corrosion resistance, making it ideal for the material choice for our limited edition pocket flashlights.
The D25M Ti is machined from titanium rod with CNC and hand polished to mirror-like finish. Order your personal copy now from your EagleTac dealer before they are gone.
Best LED driver available
D25M Ti series is the first to use the A400M II driver and A850M II driver. Both feature higher efficiency, 40% lower low mode, added auxiliary modes (i.e. disorientated strobe, fast SOS), and single li-ion compatibility.
Both limited Ti edition include a rigid holster w/retention device!
CREE XM-L U2 LED
We are putting the highest and latest bin available LED into the D25M Ti for maximum brightness. XM-L led gives a flood beam in the D25 reflector. If you are looking for a more concentrated beam, choose the CREE XP-G S2 Ti version, see the output of the regular D25 with XP-G S2 LED.
What's special?
- Titanium built inside out
- Polished down to mirror finish
- Pure copper LED heatsink
- New A400M II and A850M II circuit
- Turbo boost output increases to 200 seconds
EagleTac D25CM Ti Download HD pics | std pics
Powerful ultra compact single CR123A flashlight. Must have for flashlight lovers and collectors. Uses CREE XM-L U2 or XP-G S2 LED.
- 359/94/3 LED lumen
- 255/68/3 O.T.F. lumen
- Runtime: 1/5/50+ hours
- Runs on RCR123A li-ion (direct drive*) Battery fitment
- Twisty on/off
Operations: Turn on the light by tightening the head. Loose the head to turn off the light. Repeat the on/off action in one second to cycle through all output modes. See D25C Mini specification
EagleTac D25AM Ti Download HD pics | std pics
Powerful ultra slim single AA flashlight. Great for daily users. Uses CREE XM-L U2 or XP-G S2 LED.
- 176/40/3 LED lumen
- 125/29/3 O.T.F. lumen
- Runtime: 1.2/6/50+ hours
- Twisty on/off
- Runs on 14500 li-ion (direct drive*) Battery fitment
Operations: Turn on the light by tightening the head. Loose the head to turn off the light. Repeat the on/off action in one second to cycle through all output modes. See D25A Mini specification
* Using 4.2V li-ion direct drives the LED and yields maximum output at the expense of extensive heat generated from the LED. Limit each usage to less than fives minutes (or less than one minute each with freshly charged li-ion for the first couple times). Active cooling (blowing cool air toward the light) or passive cooling (holding the light in your hand) helps preventing excessive heat built at the LED. Turn off the light to allow it to cool down if you find the flashlight too hot to hold. Do not leave the light running unintended with li-ion.